Solid timber-core carcass: multi-layer board with a solid wood strip core

headerbild-hochwertiger-Tischlerkorpus

Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.

Strength from the core

Some qualities only reveal themselves once you look inside a material. Faber's solid timber-core carcass takes its name from the blockboard from which it is made: a multi-layer construction with a core of glued solid wood strips and suitable face veneers. This sets it apart not only in dimension, but in character. It is the choice for those who refuse to compromise even where no one is looking.

hochwertiger-tischlerkorpus-Faber

Solid wood on the inside

What distinguishes a blockboard lies beneath its surface. Its core is not made of pressed chips, but of solid wood strips glued side by side and enclosed by face veneers. This construction changes the structural behaviour of the entire carcass.

Depending on the specific board specification, the strip core can offer advantages over comparable chipboard: high flexural rigidity, good screw retention, dimensional stability and, in some cases, reduced weight. How pronounced these advantages are depends on board type, thickness, strip orientation and workmanship. For this reason, we deliberately avoid quoting generalised figures.

Built for its purpose

The solid timber-core carcass is particularly well suited to bespoke fitted units, where material composition, fitting attachment and load-bearing capacity are deliberately matched to intended use. The carcass is thus planned from the inside out to suit its purpose, rather than the other way round.

This does not make it indestructible, however, as the durability of any carcass continues to depend on construction, moisture protection and use. Rather, the solid timber-core carcass stands for a particular standard: to work to a high quality even where it cannot be seen. Bespoke planning in 19 millimetres describes our 19 mm bespoke carcass. For a kitchen is only ever as good as what carries it at its core.

faber-holz-detail-Tischlerkorpus
hochwertiger-Tischlerkorpus-4
hochwertiger-Tischlerkorpus-3

Frequently asked questions

What sets it apart from the 19 mm bespoke carcass?

The decisive difference lies within the material itself. The solid timber-core carcass is made from multi-layer blockboard with a core of glued solid wood strips and suitable face veneers. The 19 mm bespoke carcass, by contrast, is made from 19-millimetre carcass boards. Both are planned individually, but with the solid timber-core carcass, the strip core changes the structural behaviour of the entire carcass. It is thus more than simply a carcass made to custom dimensions.

What advantages are possible?

Depending on the specific board specification, the strip core can offer high flexural rigidity, good screw retention and pronounced dimensional stability compared with comparable chipboard, and in some cases a weight advantage too. How significant these advantages actually are depends on board type, thickness, strip orientation and workmanship. For this reason, we deliberately avoid quoting generalised percentage or strength figures.

Is the solid timber-core carcass indestructible?

No. The strip core provides a high-quality structural foundation, but the durability of a carcass in everyday use continues to depend on construction, moisture protection and use. For this reason, we never consider the material alone, but always match construction, fitting attachment and load-bearing capacity to actual use. The result is a carcass that remains fit for purpose for many years to come.

What sets it apart from the 19 mm bespoke carcass?

The decisive difference lies within the material itself. The solid timber-core carcass is made from multi-layer blockboard with a core of glued solid wood strips and suitable face veneers. The 19 mm bespoke carcass, by contrast, is made from 19-millimetre carcass boards. Both are planned individually, but with the solid timber-core carcass, the strip core changes the structural behaviour of the entire carcass. It is thus more than simply a carcass made to custom dimensions.

What advantages are possible?

Depending on the specific board specification, the strip core can offer high flexural rigidity, good screw retention and pronounced dimensional stability compared with comparable chipboard, and in some cases a weight advantage too. How significant these advantages actually are depends on board type, thickness, strip orientation and workmanship. For this reason, we deliberately avoid quoting generalised percentage or strength figures.

Is the solid timber-core carcass indestructible?

No. The strip core provides a high-quality structural foundation, but the durability of a carcass in everyday use continues to depend on construction, moisture protection and use. For this reason, we never consider the material alone, but always match construction, fitting attachment and load-bearing capacity to actual use. The result is a carcass that remains fit for purpose for many years to come.

References: The four Masterpieces

Floating kitchen by Faber in Mallorca

The Floating Masterpiece

Our floating kitchen stages lightness as its central design element. An ingenious central steel structure supports both worktop and carcass in such a way that the supporting leg visually recedes into the background. The island appears to float, opening up the space to new lines of sight.

To the Floating Masterpiece →

headerbild-die-Architektenkueche-Faber

The Architect's Kitchen

Faber's Architect's Kitchens: here, form, function and material merge into a harmonious whole. Every detail follows a clear design concept: one colour, one material, one line. The result is a kitchen that radiates calm while possessing maximum expressive power.

To The Architect's Kitchen →

Headerbild-Cubes von Faber in Edelmetall

CUBE kitchens

Cube is our homage to understated luxury: clean geometry, precise joints, uncompromising materiality. The award-winning modular kitchen consists of four basic modules, combinable in up to 16 configurations – as an elegant run, an expressive island, or as an indoor and outdoor solution in Mallorca.

To the CUBE Masterpiece →

hub-headerbild-Steinkuechen

The Stone Kitchen

A stone kitchen by Faber Mallorca is more than simply a kitchen model – it is a statement of nature and design. Every surface tells its own story: from quartzite and slate to the finest marble. The individual veining of each stone is deliberately integrated into the design, creating a fascinating harmony of structure, colour and light.

To the Stone Kitchen Masterpiece →

Faber Küchenmanufaktur

Your vision, our
expertise! Bring your dream kitchen to life with Faber

Photo: photography design Tomislav Vukosav