Real wood veneer and veneered slatted fronts
Genuine wood in its finest form
Real wood veneer is the most refined way to showcase genuine wood. A slender layer of natural timber applied to a suitable substrate combines the warmth and grain of the tree with the ability to create calm, cohesive surfaces across generous expanses. As a plain front, it expresses the natural grain; as a slatted front, it introduces an interplay of line and light. It is the choice for those who value genuine wood and seek a kitchen that integrates into the room like an architectural fixture.

A continuous natural canvas
Veneer is genuine wood, not foil and not an imitation. Every surface reflects the vibrant patterning of its trunk, from the quiet elegance of fine lines to the expressive character of striking timbers. Faber tailors the wood species, grain, edges, and surface finish to each individual project, ensuring the timber embodies precisely the character the architecture demands.
The particular appeal of veneer lies in its matching patterns. Through deliberate selection and arrangement, the grain flows seamlessly across adjacent fronts or is book-matched into a symmetrical figure. This creates expansive, unified compositions that lend built-in cabinetry an extraordinary sense of calm and coherence.
An interplay of line and light
Veneered slatted fronts combine a natural wood surface with a precise linear structure. Delicately joined slats articulate the plane into a rhythmic relief, lending it a subtle architectural depth. As the daylight shifts, its presence transforms; shadows move across the contours, turning the front into a living architectural element.
The veneer forms the visible timber surface of each slat. For those who desire this linear structure crafted entirely from solid wood, with complete freedom to define the width, depth, and spacing of the slats, our solid wood slatted fronts provide the answer.


Genuine and chosen with care
Real wood veneer is genuine wood, yet not a solid wooden slab. How resilient a surface proves in daily use depends on the substrate, the edging, and the surface treatment—factors we calibrate precisely to the demands of each kitchen. Care simply involves wiping with a soft, lightly dampened cloth. Standing moisture should not be left on the surface for extended periods.
At the same time, veneer represents an exceptionally conscious approach to a precious natural resource. A single fine trunk yields numerous surfaces of consistent character, allowing rare timber to unfold its full beauty wherever it is showcased.


Frequently asked questions
Is a veneered slat the same as a solid wood slat?
No. With veneered slats, the veneer forms the visible wood layer over a substrate. Solid wood slats, by contrast, consist entirely of genuine timber throughout. While both produce the distinctive interplay of line, light, and shadow, their internal construction differs. At Faber, solid slatted fronts are also crafted entirely to order, allowing complete freedom in the width, depth, density, and arrangement of the slats.
Can the grain run continuously?
Yes, through considered veneer selection and sequence. When the veneer leaves are processed in consecutive order, the grain can flow uninterrupted across multiple fronts or be arranged as a mirror-matched pattern. This results in serene, cohesive compositions that make cabinetry appear as though crafted from a single piece. Such an effect never happens by chance; it is the result of meticulous planning undertaken specifically for each project.
Is veneer an imitation wood foil?
No. Real wood veneer consists of natural timber sliced into fine sheets from the log and applied to a suitable substrate. Unlike printed foil, it exhibits the authentic grain, natural tonal depth, and genuine tactile warmth of real wood. No two surfaces are ever alike, as each veneer bears the distinct fingerprint of its tree. Veneer is thus genuine wood in its most refined form, never an imitation.
Is a veneered slat the same as a solid wood slat?
No. With veneered slats, the veneer forms the visible wood layer over a substrate. Solid wood slats, by contrast, consist entirely of genuine timber throughout. While both produce the distinctive interplay of line, light, and shadow, their internal construction differs. At Faber, solid slatted fronts are also crafted entirely to order, allowing complete freedom in the width, depth, density, and arrangement of the slats.
Can the grain run continuously?
Yes, through considered veneer selection and sequence. When the veneer leaves are processed in consecutive order, the grain can flow uninterrupted across multiple fronts or be arranged as a mirror-matched pattern. This results in serene, cohesive compositions that make cabinetry appear as though crafted from a single piece. Such an effect never happens by chance; it is the result of meticulous planning undertaken specifically for each project.
Is veneer an imitation wood foil?
No. Real wood veneer consists of natural timber sliced into fine sheets from the log and applied to a suitable substrate. Unlike printed foil, it exhibits the authentic grain, natural tonal depth, and genuine tactile warmth of real wood. No two surfaces are ever alike, as each veneer bears the distinct fingerprint of its tree. Veneer is thus genuine wood in its most refined form, never an imitation.
This material in our Masterpieces
The Architect's Kitchen
In The Architect's Kitchen, everything follows a clear concept: one idea, one line, one material. When wood becomes that material, its calm grain carries the entire composition. Applied across generous, uninterrupted planes, it creates a warm, effortless architecture.
Faber Küchenmanufaktur
Your vision, our
expertise! Bring your dream kitchen to life with Faber
Photo: photography design Tomislav Vukosav

